Replacing Window Handle
Over time the window handle could become damaged from frequent use and exposure. This could result in the handle becoming wobbly or loose which makes it difficult to open and close your window.
Replacing the handle on your window is a simple task that can be completed in a matter of minutes. The first step is to remove the screws holding the handle in place and then locate a replacement.
Handle Identification
The choice of the perfect window handles might seem like a minor detail but it will significantly impact the look of your windows. The most effective handles will improve the look of your home, by enhancing your chosen design style. On the other hand, a sloppy handle can be a glaring annoyance that disrupts the harmony of your living space.
It is essential to identify your window handle carefully before purchasing replacements. It is important to identify your window handle before purchasing replacements. This will ensure that the new handles will work with the uPVC windows you already have, and that they have the functionality you want.
Window handle designs vary from traditional sash-lifts to contemporary tilt and turn designs. The most commonly used types of window handles include:
Espag Window Handles
These handles are equipped with a mental spindle that is fixed to the back of the frame and is the motor for the window mechanism. The handles are fixed in place to stop them from moving when used. This kind of window handle can be found in many modern homes.
Cockspur Window Handles
Featuring intricate designs and antique finishes, cockspur handles add charm to classic or traditional homes. They are available in a variety of shades, so you'll find one that is perfect for your existing decor.
Handles for Casement Window
This kind of window handle is found on both casement and awning Windows. The simple crank allows windows to be opened and closed smoothly. This handle can be found in a variety of American homes from modern farmhouses to suburban one-story houses.
Remove RepairMyWindowsAndDoors from the bottom of the handle, and then store them in a safe place. You should also note the length of the spindle since this will be a key factor when determining the right size handle for your windows. Once you've identified the type and size of handle you want then you can begin looking for a new one. When purchasing a replacement handle, make sure that the spindle length is exactly the same as the original one. If you're not sure of the spindle length, it is recommended to purchase an item with an adjustable spindle.
Identifying the length of the spindle
If you're replacing a window handle, it is important to be aware of how far the spindle extends from the base. This will allow you to choose the appropriate replacement. The square peg on the back of the handle will usually be connected to the spindle with either a screw or a pin. Take off the old handle, then find the screw or pin and use a screwdriver to remove it. Then, remove the spindle, and note the length of the metal bar it connects to.
The spindle's size will aid in determining the type of handle you will install on your uPVC windows. This is important, since each handle has its own way of fitting into the uPVC frame. For instance, older handles have spurs that extend and locks over the wedge striker. Cockspur handles are the name they're given and should match when replacing. The spindle is covered with a sleeve on newer handles.
The type of handle you have that is installed in the uPVC window will allow you ensure that the replacement handle is a exact match. In addition to the length of the spindle and width, you should also take into consideration whether the handle is a hand or not. Handles that open anti-clockwise are right-handed, whereas those that open clockwise are left-handed.
Another important aspect to take into consideration when determining the kind of uPVC window handle is the step height. This is the length of the metal square that extends from the base of the handle to the back of the window frame. Take this measurement, and then purchase an additional handle with the same height step to ensure that it is sized to fit into the window frame.
The process of replacing a uPVC window handle is relatively easy, particularly if you can identify the correct part number. After removing the old handle and replacing the visible screws by covering them with screws. Then, take a careful look at the base of the handle to locate any fixing screws hidden beneath it. Remove the screws with the help of pliers, a screwdriver, or other tools. Then, pull the handle from the window frame.
Identifying Screws
Window handles may not receive much attention, but they're an essential element of your windows in terms of functionality and aesthetics. It's not a surprise that window handles can become damaged and need replacement. Fortunately, changing windows handles is easy and can be completed in a matter of a few steps. It is important to know the kind of handle you have before replacing it. Not all uPVC handles are the same size, so you need to make sure that the new handle will fit into the holes that are already there and that the rod (spindle) is the correct length.
Once you've identified what type of handle you have then you can remove it and take out the old one. You'll require patience and the use of a screwdriver. The handle is attached to its base using either a screw or pin, which can be removed by unscrewing it from the outside of the frame. When you've got the handle removed, you can start dismantling the fixing screws or pins that secure it to the frame. They are located in the holes that surround the handle base. Once these have been removed, the handle can be pulled off and the spindle pulled through from behind to secure it in place.
After removing the handle you must measure the length of spindle. Place something in the middle hole. Then, you can check the label on the handle to confirm that it is the right size for the windows you have. Alternately, you can drop something into the hole and measure its depth to determine what size spindle you need to purchase.
Once you've determined the length of the spindle, you can start putting in your new handle. Line up the holes in the window frame with the holes on the handle and tighten the pins or screws. Don't over-tighten them, because this could cause the handle to crack or begin to warp. After you've installed your new handle, be sure that it's secure then test it by removing and closing the window a few times.
Identifying the window frame
When your uPVC window handle is smashed off, it can be a very stressful experience and could appear to be inoperable. However, it is likely that the handle simply lost its grip, and can be easily fixed with just a few steps. Knowing the type of handle you are using is vital since there are a variety of kinds of handles for double-glazing windows, and some are only available from certain manufacturers. It is easier to find the right replacement handle if you can identify the type of handle you have.
In most cases, the handle is held in position by screws located between covers on either on either side. Using a screwdriver you can take off the cover and expose the screw holes. Make sure to keep these screws covered because you will require them when you install the new handle.
After taking off the screws then you can remove the handle. After removing the handle, you can see the spindle which runs through it into the lock mechanism in the window frame. When purchasing a new handle, it is essential to ensure that the length of the spindle is the same as the old one. You can check this by looking at the old handle or by dropping something into the hole of the spindle to determine the depth. Once you have the right size spindle, you can fit the handle onto the window. Secure it with a pin or screw.
When a window handle fails it's usually due an absence of maintenance, such as cleaning or lubrication. This can lead to the handle becoming deteriorated over time, and eventually causing it to break prematurely. The handle can also be subjected to additional stress if it isn't correctly fixed or aligned with the window frame. The handle may be put under pressure that could cause it break. All of this is preventable by regular maintenance and making sure that the handle is fitted correctly.